Cabineo

the CNC connector of the future

  • Faster processing times
  • Fewer process steps
  • Lower transport volume
  • Shorter assembly times
  • Sturdier connections
One-piece: No preassembly of screws or dowels! Fast programming for astronauts! Very high stability in the end product! Shorter flight time without edge drilling! Driven by all CNC machines! Processing at the speed of light – no dowel drilling required

Hover over
the rocket!

"The new Cabineo connector is simply fantastic! The time saved from processing to assembly won us all over right away." Meinrad Keusch, Head of Operations and member of the Board of Directors
Ruepp Schreinerei AG in Sarmenstorf

"Stackability guaranteed – including an installed connector." Mr I. Slomski, Managing Director
Objekteinrichtung Hengelhaupt GmbH in Grevesmühlen

"Assembly is much quicker than with a cam and dowel." Mr M. Beck, Production Engineering
Tischlerei Mario Beck in Hamburg

The Cabineo
has landed!

The CNC connector of the future is here:
Simple, Fast, Strong!

Cabineo

The timesaving furniture connector without edge drilling and with high clamping force:

  • Efficient machining with all CNC machines
  • Faster machining and assembly
  • Stronger connections

The connector of the future: Simple, Fast and Strong!

Time-savings for whole production process!
Simple, Fast and Strong!

Advantages of Cabineo compared to cam and dowel

The Cabineo is a one-piece cabinet unit fitting. In comparison with the standard cam and dowel fitting, the Cabineo offers more efficient production, faster installation and a higher clamping force. To top it off, there is no need for wooden dowels.

Cabineo can be used with all kinds of CNC machines, including very simple 3 axis and nesting machines. The concept of the fitting was designed to use a minimal amount of resources for a maximum of functionality.

Size 33.8 x 16.5 x 10.8 mm
Cutter Ø 12 mm (1/2") or smaller
Drill Ø 5 mm and Ø 15 mm
Material of connector fibreglass reinforced plastic
Installation tolerance longitudinal ± 0.1 mm
Tensile strength ~900 N ~90 kg

The timesaving furniture connector without edge drilling and with high clamping force

The Cabineo is a one-piece cabinet unit fitting and is installed into a drilled or routed shape. No edge drilling is necessary - the machining happens solely in the surface. Due to this, Cabineo can be used with all kinds of CNC machines, including very simple 3 axis and nesting machines. In comparison with the standard cam and dowel fitting, the Cabineo offers more efficient production, faster installation and a higher clamping force. To top it off, there is no need for wooden dowels.

The concept of the fitting was designed to use a minimal amount of resources for a maximum of functionality. The Cabineo offers considerate advantages in the whole process, including production, transport and installation. Installing the fitting into the workpieces and stacking them during the production process is possible without any protruding parts, which could damage the finished surfaces. This eliminates the packing of bags with fittings which would need to be delivered to the job site for installation.

Because the elements are already factory-installed, the person assembling doesn't need to handle loose fittings supplied in a bag during installation. This speeds up the assembly considerably and additionaly helps in reducing possible mistakes.

The fitting is inserted into the routed shape on the surface. This can take place in production prior to transport or following transport at the final destination. The preinstalled screw inside the fitting is then screwed into the 5mm drill hole in the corresponding workpiece, using a ball-end allen key. The speed of the cordless drill joins the workpieces quickly and powerfully.

Cover caps in various colours are also available and can be clipped onto the Cabineo within seconds.

Cabineo will be presented for the first time at the Interzum in Cologne and will be available in retail from 16th May 2017. Cabineo, the connector of the future: Simple, Fast and Strong!

Applications:

  • Furniture
  • Interiors
  • Exhibitions
  • Store fixtures
  • Caravans
Cabineo articles Art.No.
Cabineo Starter Set, Cabineo 8 + 12, 40 pcs each, Cabineo tool with handle, cover caps (40 pcs) 186305
Cabineo 8, for dividing panels from 16 mm, 500 pcs 186310
Cabineo 8, for dividing panels from 16 mm, 2000 pcs 186311
Cabineo 12, 500 pcs 186320
Cabineo 12, 2000 pcs 186321
Cabineo tools Art.No.
Cabineo tool with handle 256300
Cabineo hex bit 276312
Cabineo drill Ø 15 mm 136312
Cabineo cutter Ø 10 mm 136310
Cabineo cutter Ø 12 mm 136311
Cabineo Cover caps Art.No.
Plastic Signal white RAL 9003, 100 pc
186350S
Plastic Signal white RAL 9003, 2000 pcs
186351S
Plastic Papyrus white RAL 9018, 100 pcs 186350P
Plastic Papyrus white RAL 9018, 2000 pcs 186351P
Plastic Window grey RAL 7040, 100 pcs 186350F
Plastic Window grey RAL 7040, 2000 pcs 186351F
Plastic Brown beige RAL 1011, 100 pcs 186350B
Plastic Brown beige RAL 1011, 2000 pcs 186351B
Plastic mouse grey RAL 7005, 100 pcs 186350A
Plastic mouse grey RAL 7005, 2000 pcs 186351A
Plastic Jet black RAL 9005, 100 pcs 186350T
Plastic Jet black RAL 9005, 2000 pcs 186351T

Find your local distribution partner:

What Our Customers Say

«Efficiency in production is a win for us»

Andreas Derrer and Corrado Tona,
Schreinerei Derrer, a carpentry company with head office in Dielsdorf
(Customer Report)

"The new Cabineo connector is simply fantastic! The time saved from processing to assembly won us all over right away."

Meinrad Keusch,
Head of Operations and member of the Board of Directors. Ruepp Schreinerei AG in Sarmenstorf, Switzerland
(Download PDF Reportage)

"Stackability guaranteed – with connector already installed."

Mr I. Slomski,
Managing Director, Objekteinrichtung Hengelhaupt GmbH in Grevesmühlen
(Download PDF Reportage)